Toyota sienna how to program keyless entry remote control security

NOTE: Steps 4 - 6 should be performed within 40 seconds. Close and open the driver's door twice. Insert the key into the ignition. Close the door. Turn the ignition switch from "Lock" to "On" and back to "Lock" at about 1 second intervals to select the desired mode: 1 time for ADD mode. Remove the key from the ignition.

To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 7. Press both car transmitter Lock and Unlock buttons simultaneously between 1 and 1. Within 3 seconds of step A, press the transmitter Lock button for more than 1 second and release.

If the keyless entry remote transmitter has been successfully programmed, the power locks will cycle "lock" to "unlock" once at this time. If there are problems with the remote transmitter or the procedure up to this point, the locks will cycle twice.

If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure. If multiple remotes are to be reprogrammed, repeat steps A and B. Time needed: 5 minutes. Perform the following steps within 5 seconds: a. Perform the following steps within 40 seconds: a. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same. If you have any difficulties with programming your vehicles, contact us at [email protected].

No ifs, ands, or buts! Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do. You're also not paying for huge fancy offices or sports cars for our Owners.