Microsoft windows xp vpn server

If the icon has a green arrow pointing up in the lower-left corner, the Routing and Remote Access service has been turned on. If the Routing and Remote Access service was previously turn on, you may want to reconfigure the server. To reconfigure the server:. Click to select VPN or Dial-up depending on the role that you intend to assign to this server. In the IP Address Assignment window, click Automatically if a DHCP server will be used to assign addresses to remote clients, or click From a specified range of addresses if remote clients must only be given an address from a pre-defined pool.

In most cases, the DHCP option is simpler to administer. However, if DHCP isn't available, you must specify a range of static addresses.

Click Next to continue. If you clicked From a specified range of addresses , the Address Range Assignment dialog box opens. Click New. Type the first IP address in the range of addresses that you want to use in the Start IP address box.

Windows calculates the number of addresses automatically. Accept the default setting of No, use Routing and Remote Access to authenticate connection requests , and then click Next to continue. For the remote access server to forward traffic properly inside your network, you must configure it as a router with either static routes or routing protocols, so that all of the locations in the intranet are reachable from the remote access server.

The number of dial-up modem connections is dependent on the number of modems that are installed on the server. For example, if you have only one modem installed on the server, you can have only one modem connection at a time. The number of dial-up VPN connections is dependent on the number of simultaneous users whom you want to permit. By default, when you run the procedure described in this article, you permit connections.

To change the number of simultaneous connections, follow these steps:. You can also configure a static IP address pool. Configure the dial-in properties on user accounts and remote access policies to manage access for dial-up networking and VPN connections.

To grant dial-in access to a user account if you're managing remote access on a user basis, follow these steps:. If the VPN server already permits dial-up networking remote access services, do not delete the default policy. Instead, move it so that it is the last policy to be evaluated. To set up a connection to a VPN, follow these steps.

To set up a client for virtual private network access, follow these steps on the client workstation:. Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps. Click Create a new connection under Network Tasks , and then click Next.

Click Connect to the network at my workplace to create the dial-up connection. Type a descriptive name for this connection in the Company name dialog box, and then click Next. Click Do not dial the initial connection if the computer is permanently connected to the Internet.

Click Next. Click Anyone's use if you want to permit any user who logs on to the workstation to have access to this dial-up connection. Click My use only if you want this connection to be available only to the currently logged-on user.

Click Properties to continue to configure options for the connection. To continue to configure options for the connection, follow these steps:. Click Start , point to Connect to , and then click the new connection.

If you don't currently have a connection to the Internet, Windows offers to connect to the Internet. When the connection to the Internet is made, the VPN server prompts you for your user name and password. Type your user name and password, and then click Connect. About 10 computers in this office and all on active directory. No issues there. Server IP of Remote Office A. Computers in the remote office A have DNS directly to the server How can I get them to join the domain and be able to browse the network via network places, ping by FQDN and such?

Sorry for the delay. Disabled offline file feature and removed the entry from the host file Went to add it to the domain dignity. Praying it would join the domain then I just got the computer to join the domain. Network path was not found triggered something in my head Hi Steve,. Thanks for posting here. So these three hosts at branch are using this Windows server domain controller for name resolution now. Is that the preferred DNS server at client? WINS is optional cos DNS has already been deployed in my environment so please first ensure these hosts are properly running with it.

Tiger Li. TechNet Community Support. Thanks for update. Try to first remote the entry form hosts file on client. That always-on link can be used to accept incoming VPN connections and allow your mobile users to access shared folders and files on your private network. The Windows XP Professional remote access server capabilities are very similar to those available in Windows Professional.

A Windows XP computer can accept a single incoming connection on each interface that can accept a connection. However, the typical configuration consists of a single RAS client connection, either through a dial-up modem interface or a VPN interface.

The machine has two network interface cards; one is directly connected to the Internet and the other is connected to the internal LAN. However, to prevent problematic configuration issues, you should configure the VPN interface before you configure ICS on the same computer. In the Control Panel, open the Network Connections applet. Figure A The Network Connections window.